DELMIA Communities Week in Review
Blog: Apriso Blog
Hello and Welcome to the Week in Review!
This is the weekly blog post that will give a one-look overview of what happened in the DELMIA Communities this past week. But there is a lot more than what you will see below. Visit the communities to see the exchange of information and ideas between members and DELMIA experts. With eight active communities, you are sure to find at least one to suit your DELMIA interests. Connect with us to exchange and share on the DELMIA Communities.
See you there!
Defining the 4-step transformation model to help you self-assess
Critical to successful Transformation is the ability to assess your status and maturity level at each of transformation steps individually.
The 4-step maturity transformation model for operations, helps you determine where and how to start or accelerate your transformation journey. Click to read more.
A disruptive risk landscape expected over the next coming years
From a global, online survey executed at the end of 2020 with more than 1000 C-level executives and directors across multiple industries, with broad geographic representation, the results showed significant uncertainties and risks were expected over the short term as well over a 10-year horizon. Read the rest of the post on the community.
How does DELMIA support Lean Transformation?
If we agree that Lean Management is not a new system to operate companies, but the evolution of several production systems within the history (starting with Taylor, then Ford, Taishi Ohno and more…), I think we can simply consider digitalization as one of the consequences of those improvements and just think how it can support this continuous evolution. Discover the rest of the post in the community.
Lifting rules intro
Safety is the #1 top priority of lean management. And lifting is one of important safety topics closely linked to plant daily operations. Here is a short video for introducing the concept of the lifting rules. Go to the community to see the video.
Virtual Commissioning in Aerospace: DELMIA, Control Build, Virtual PLC and Virtual Robot Controller (Part 1/2)
Here is a complete demo of the DS solution for Virtual Commissioning in the Aerospace industry (robotized drilling riveting workcell). There are 4 steps in the demo: Click to watch!
[On-Demand Webcast] Manufacturing Excellence through Virtual Factory Replication
Computer-aided design and manufacturing enable designers to develop digital objects, create virtual factories to produce them and run simulations to see how the plant would work in the real world. Once the factory goes into operation, the simulation tool is put away. But what if data from the real factory could be fed…. visit to access the link.
Too large variation angle during 5x Machine simulation
In the following record, too large variation angle was occurred during 5x machine simulation (DMU65 – table-table). Despite the correct setup of the kinematics checking inside the part operation and MO (see the captures), the result of multi axis flank operation was wrong, unusable and some collisions were detected. Visit the community to find the solution.
If you want to learn about DELMIA brand capabilities for machining, watch Mike and Jeremy
It was live, but you can visit the community to watch the replay.
What are “Capable Resources?” How they are different from resources we create in “Resource Tree?” How can they be used in real scenarios?
Go to the community to see the explanation from the DELMIA expert.
Process #4: Grasp closure
This final process consists of closing the fingers on the object while keeping the hand position and orientation obtained during the previous process. The closure is done by simultaneously moving the 23 DOF of the hand from an opened configuration to a closed configuration. Get the rest of the information in the community.
Make Ortems user-friendly for everyone with Colorblind functionality
If you cannot read the number on this picture, you’re probably part of the 4% of color-blind people in the world. If that is the case, don’t worry, Delmia Ortems is designed for everyone, introducing color-blind options in the planning module. Find out more about this functionality in the community.
Sustainable health workforce
The Covid-19 pandemic has placed extreme stress on healthcare systems in nations across the globe. While there are various aspects that are having abnormally-increased demand from the pandemic, this post focuses on having a sustainable workforce to support any nation’s healthcare system. Read the rest of the article in the community.
Welcome everyone, and for those who do not know me, let me introduce myself.
My name is Krzysztof and I am WW Industry Process Consulting Director in DELMIA brand. I have multiple years of MOM deployment, consulting and sales experience (if you’d like to know more – feel free to connect with me via LinkedIn). Read more from Krzysztof on the MOM community.
Thermax uses DELMIA Apriso MES to manage production schedules
Discover how Thermax has been surpassing its manufacturing target projections and deliveries since 2019, thanks to the DELMIA Apriso Manufacturing Execution System. Find the link to the interview in the community.
Thanks for reading – see you next week! In the meantime, don’t forget to keep up to date with the DELMIA Communities.